Compact FormatSave $40
Mini
20" × 20" · 50 × 50 cmChair & under-desk warmth
$139$179USD
+ $39 standard US shipping
Focused infrared warmth and 1–30 Hz PEMF for your favorite reading chair, footrest or desk setup
Holiday Sale · Save Up to $220
Deep infrared warmth & 1–30 Hz PEMF for your daily wind-down
Mineral-filled channels, carbon-fiber infrared warmth and separately controlled 1–30 Hz PEMF—crafted in three sizes for how you rest at home
From $139Best-Selling Core Mat $399 $549Free US Shipping
- 30-Day Home Trial
- 1-Year Warranty
- US 110V Plug Included
- Import Duties Covered
Holiday Sale · Up to $220 Off
Choose your coverage
Every mat includes a digital controller with 5–60 min timer, 1–30 Hz PEMF & independent photon lights
Most PopularSave $150
Core
39" × 20" · 100 × 50 cmSofa, back, hips & legs
$399$549USD
✓ Free US standard shipping
Our best-selling mid-size mat—generous infrared warmth and 1–30 Hz PEMF for your back, hips and legs on the sofa or bed
Full-Length CoverageSave $220
Full body
75" × 31" · 190 × 80 cmFull-length stretch-out rest
$879$1,099USD
✓ Free US standard shipping
Our largest mineral-filled surface with 4 PEMF coils and 24 photon LEDs so you can lie back and stretch out completely
Actual studio product photography · Switch to Relative scale to compare footprints side by side
Full size guide (in & cm)Risk-free home trial & commercial guarantee
Order with complete confidence
Clear, written protection on every mat—supported directly by Velmeno at support@velmeno.com
30-Day Home Trial
Experience your Velmeno mat in your own living room or bedroom for 30 days from delivery. If it is not right for you, return it in clean, undamaged original condition for a refund within 5–10 business days
Read 30-day return policy1-Year Limited Warranty
Every mat is protected for 12 months covering the carbon-fiber heating element, temperature sensors, PEMF coils, visible photon LEDs and handheld digital controller—with free warranty replacement shipping
Read 1-year warrantyFree Duties & Tracked 8–10 Day US Delivery
Core and Full-Body ship free across the US, import duties are covered by Velmeno, and every US & Canadian order arrives with a native 110–120V plug ready for your outlet
Read shipping detailsWhat you can expect
Warmth for rest,
controls for you
Start with heated comfort. PEMF and visible light are additional, separately controlled modes
Heat you can feel
Carbon-fibre heating warms the surface beneath your feet, back or body. Choose the temperature and time for your break
An optional PEMF mode
Choose a frequency from 1 to 30 Hz and switch PEMF on or off independently from warmth
Separate LED lights
Full body has 24 LEDs: eight blue, eight red and eight green. Mini and Core each have six red lights, with a separate light control
Illustrated technology
Comfort you can feel
A warmer place to wind down
Enjoy a heated surface while you read, sit back or stretch out. Choose a comfortable level of warmth for your break
How it works
A carbon-fibre element heats the surface. Adjust temperature and session time with the controller and follow your model’s instructions
Get to know
your controls
See the Full body controls in use. Follow the instructions supplied with your exact model.
Actual product footage
Made for your everyday
Comfort in
every detail
A warm, textured surface to read, sit back or stretch out at home
Your warmth, within reachExplore 15-layer constructionMake room
for yourself
Explore 1–30 Hz PEMFMake sense of the setting
Explore your
PEMF settings
1 hertz = 1 cycle per second
2Hz2 cycles per second
1 Hz30 Hz
Illustration, not a live measurement or mat control
2 cycles per second
Adjust the magnetic-field frequency from 1 to 30 Hz, separately from warmth
What the Hz setting means
PEMF means pulsed electromagnetic field. Hertz describes how often the field repeats each second, not the temperature or a sound frequency
Use the mat’s hand-held controller to change its settings and follow your model’s operating instructions
Full-body construction
15 layers
working together
Explore the surface, heating layer, PEMF coils, sensor and backing
Warmth beneath the filling
A carbon-fibre element heats the channel filling from below, bringing warmth to the surface where you rest
Two temperature safeguards
A sensor feeds temperature information to the controller, alongside a separate overheat-protection component
A wipe-clean PU finish
Smooth PU surrounds the mesh channels and finishes the backing, making these outer areas easy to wipe clean
The channelled surface
Mesh holds the channel filling above the heating layer
Five grouped systems · Illustration not to scale
Explore the complete 15-layer construction
1Photon light layer
The visible blue, red and green light elements sit at the surface. The full-body mat has 24: eight of each colour
2Polyester mesh
A fine mesh holds the channel filling in place while leaving its small-grain texture visible
3Upper PU support
The upper PU layer sits beneath the mesh surface
4Channel filling
The filling is held in channels beneath the mesh surface
5PEMF coil layer
Four coils in the full-body mat produce a pulsed electromagnetic field, adjustable from 1 to 30 Hz
6Dense cotton support
A dense cotton layer supports the internal assembly and separates neighbouring components
7Temperature sensor
The sensor provides temperature feedback to the controller. The selected setting is not a measurement of your skin temperature
8Overheat protection
A separate overheat-protection component sits beneath the temperature sensor. Always follow your model’s instructions
9Upper aluminium foil
An aluminium foil layer sits above the heating assembly
10Upper protective cotton
A protective cotton layer sits above the powered heating element
11Carbon-fibre heating element
The powered carbon-fibre heating element provides adjustable warmth
12Lower protective cotton
A second protective cotton layer sits beneath the heating element
13Lower aluminium foil
The second aluminium foil layer forms part of the lower thermal assembly
14Base padding
Base padding sits above the outer backing
15PU backing
The outer backing finishes the underside and encloses the internal assembly
Inside the mineral warmth
The role of stones
& ion balls
The filling takes up heat from the layer below. You feel that warmth through the mat’s surface while you sit back or stretch out
Amethyst & white crystal
Stone grains take up heat from the powered layer and pass warmth towards the surface where you rest
Read more
Amethyst belongs to the quartz family. Heat capacity describes how a material stores energy as it warms and releases it as it cools
Onyx & mixed crystal
These stone-chip fillings share the same heating layer, adding mineral mass to the channels beneath the mesh
Read more
The carbon-fibre element supplies the heat, which passes through the filling and cover. Choose your warmth and session time with the controller
Mineral science
Tourmaline
A mineral studied for its infrared-emitting and temperature-sensitive electrical properties
Read more
Tourmaline can develop a surface charge when its temperature changes. This is called pyroelectricity: a material property, rather than a controller setting
Ion balls
Rounded beads form part of the heated filling. Their ‘negative-ion’ name refers to their intended ion-release role
Read more
Negative air ions are electrically charged molecules. In laboratory materials, ion release depends on the mineral blend and how it is made. Bead colours are part of the material palette, not separate heat or light settings
Explore the links above for mineral identification, heat-capacity data and laboratory research on ion-emitting materials
Make the routine
your own
Simple digital settings for warmth, session timer and 1–30 Hz PEMF
Velmeno
95°F / 35°C
Illustrative settingWarmth to suit you
Start gently and dial in your comfort—77–176°F (25–80°C) setting range on Mini & Core; always follow your model’s operating guide
Watch the real controls30-day trial · 1-year warranty
Your questions
answered
Sizing in inches & cm, heat settings, 1–30 Hz PEMF, shipping and returns
Talk to our teamWhich size is right for me?
Choose Mini (20" × 20" / 50 × 50 cm, $139) for a reading chair, footrest or under-desk warmth; Core (39" × 20" / 100 × 50 cm, $399, free US shipping) as our most popular size for your back, hips and legs on a sofa or bed; or Full body (approx. 75" × 31" / 190 × 80 cm, $879, free US shipping) when you want full-length room to stretch out.
How does the 30-day home trial work?
Try your Velmeno mat at home for 30 days from delivery across the US, Canada, UK, Ireland and Australia. If it is not the right fit, email support@velmeno.com within 30 days of delivery and return it in clean, undamaged original condition with the controller, cord and packaging for a refund to your original payment method within 5–10 business days. Return shipping is covered by the buyer for change-of-mind returns, and covered free by Velmeno if an item arrives faulty or damaged.
What does the 1-year limited warranty cover?
Every Velmeno mat includes a 1-year limited warranty covering the carbon-fiber heating element, temperature sensors, PEMF coils, visible LEDs and handheld digital controller under normal home use—alongside all mandatory statutory consumer guarantees.
How warm does the mat get, and how long is a session?
You set both warmth and session length (5–60 min) on the handheld digital controller. Mini and Core feature a 77–176°F / 25–80°C controller setting range, while Full body follows its dedicated model operating guide. Controller settings measure internal heating rather than skin temperature—always start gently and follow your model’s instructions.
Are the 1–30 Hz PEMF settings sounds or vibrations?
No—PEMF stands for pulsed electromagnetic field. Built-in coils produce an adjustable 1–30 Hz pulsed magnetic field, separate from heat. It is not sound volume or mechanical massage vibration, and you can switch PEMF on or off independently.
How do the visible photon lights differ from the warmth?
The carbon-fiber layer provides the infrared warmth, while the visible surface LEDs have their own independent button on the controller. Mini and Core each feature 6 red lights; Full body features 24 lights (8 red, 8 green and 8 blue).
What plug, shipping & safety details should I know?
US and Canadian orders include a matching US 110–120V plug (UK, Ireland and Australia receive their country-matched plug), import duties are covered by Velmeno, and tracked delivery takes an estimated 8–10 business days. Ask a qualified healthcare professional before use if you have an implanted electronic device, are pregnant, have reduced heat sensitivity or a medical condition.
Holiday Sale · Save up to $220 · 30-Day Home Trial
A warmer space
of your own
Free US shipping on Core & Full-Body · 1-Year Limited Warranty · US 110–120V Plug Included